Page 6 - Pavement Protection System Brochure
P. 6

Whether to apply a full Pavement Protection Overlay
       Sealant or if a Crack Repair System is needed


       Pavement selection is important in determining the success or failure of a protection sealant or a repair crack
       sealing project.  For this purpose the PASER Evaluation Method was developed.  The Paser method defines
       defects; evaluates and rates pavement surfaces; and provides a remedy which meets US and international
       road construction specifications.  The following classifications and remedies are excerpts from Paser Asphalt
       Road Manual – Pavement Surface Evaluation and Rating 2002.

       There are a number of defects that occur in pavement surfaces. These include:

        SURFACE DEFECTS


                              Raveling - Progressive loss of pavement material from surface downward caused
                              by stripping of the bituminous film from the aggregate, asphalt hardening due to
                              ageing and poor compaction. Slight raveling has loss of fines. Severe raveling has
                              loss of coarse aggregate.
                              SOLUTION:  Thin overlay seal coat with EBS




                              Flushing – Excess asphalt on the surface caused by poor initial asphalt mix design
                              or by paving over flushed surface.
                              SOLUTION:  Overlaying a new asphalt layer with EBS Surface Sealant.







                              Polishing -  A smooth slippery surface caused by traffic wearing off sharp edges
                              of aggregate.
                              SOLUTION:  Repair with an EBS Seal coat overlay with a sand seal if required.






        SURFACE DEFORMATION


                              Rutting -  Displacement of material creating channels in wheel paths caused by
                              traffic compaction or displacement of unsuitable material.
                              SOLUTION: Minor rutting repair with overlays using EBS. For severe rutting, mill the
                              old surface, reconstruct the bed and then re-surface and seal with EBS.




                              Distortion - Shoving or rippling of surface material in displaced crossways, which
                              effect the direction of traffic.  It can develop in to wash boarding when the asphalt
                              mixture is unstable because of poor quality aggregate or improper mix design.
                              SOLUTION:  By milling smooth with EBS and overlaying with a stable asphalt mix
                              and EBS Surface Seal.












        Intelligent telligent telligent
        Intelligent
        In               ™
        In
                         ™
                         ™
        R
        R                                                     Soil Solutions (International) Ltd.  EBS  – Pavement Protection System
        Road Solutionsoad Solutionsoad Solutions
   1   2   3   4   5   6   7   8   9   10   11